nke Multigraphic
Autopilot
Direct control: Auto, Stand-by, +10, -10, +1°,-1°
3 dedicated pages: XTE, analogue page and digital page
Direct access to pilot’s settings
Navigation
10 pages, programmable with up to 6 values. Mix of analogue, digital, and graphic diplay
Display nke bus and NMEA data
Direct access to sensors calibration and alarm settings
Performance functions*
A racing page gives access to:
True Wind indicator : true wind direction trends at a glance and accurately.
Race timer
Start line : boat and pin, length, distance to go, time to burn. Favourable side is expressed in angle (°) and distance (meters)
True Wind angle tables. These values apply a correction to the measured data
Current and drift: the Multigraphic calculates automatically the drift and displays speed and direction of the current.
Tactician page for better racing
This page displays valuable information for strategic decisions on beatin legs (V2.1).
True wind indicator : true wind direction trends at glance. Instant and average
Compass heading, Course over ground, waypoint bearing
Calculate drift
Current: direction and speed
Waypoint : heading and bearing to the mark
Selection of 4 data to display
More proprieties
Keyboard lock and display stand-by mode
Alternant display of 2 values on the same line.
Backlight : day and night skins
COG magnetic value (V2.0)
Sensors’ settings locked by user password (V2.0)
Display dynamic channels from Adréna and Expédition software packages (V2.0)
WiFi Box : RWiFi nertwork settings and display WiFi name and key (V2.0)
Additional information
Supply | 8V – 32V DC |
---|---|
consumption | 90 mA @ 12V |
Waterproofing | IP68 |
Cable | Ø5mm, 4 conductors + ground wire, length 5m |
Operating temperature | -10°C / 50°C |
Storage temperature | -20°C / 60°C |
Weight | 750 g with 6 m cable and protective cover |
Dimensions with protective cover | 196 x 122 x 28 mm |
Dimensions without protective cover | 196 x 118 x 23 mm |
Color | White, Carbon |